Environmental Test Chamber Range
Our environmental test chamber range covers the full spectrum of climatic, corrosion, weathering and combined stress testing required by industries from electronics and automotive to packaging and building materials. All chambers comply with major international test standards including IEC 60068, MIL-STD-810, ISO 9227 and ASTM.
Altitude Test Chamber
Simulates low-pressure / high-altitude conditions for testing avionics, aerospace components and battery systems. Achieves pressures equivalent to 30,000+ m altitude with precise control.
- Pressure range: 0.5 kPa – 107 kPa
- Temp range: -70°C to +180°C
- Standard: IEC 60068-2-13
Climatic Test Chamber
Temperature and humidity combined testing for accelerated reliability evaluation. Programmable ramp rates, hold times and cyclic profiles for thermal shock, condensation and dew-point testing.
- Temp: -70°C to +150°C
- Humidity: 10% – 98% RH
- Standard: IEC 60068-2-1/2/14
Formaldehyde Emission Chamber
Controlled environment chamber for measuring formaldehyde and VOC emissions from furniture, wood panels, flooring and building materials per EN 717-1 and GB/T standards.
- Volume: 1 m³ to 40 m³
- Temp: 23°C ±0.5°C
- Standard: EN 717-1, GB/T 17657
Temperature-Humidity-Vibration Chamber
Combined THV (AGREE) test chambers for simultaneous temperature, humidity and mechanical vibration stress. Used for highly accelerated life testing (HALT/HASS) of electronics and assemblies.
- Temp: -70°C to +150°C
- Vibration: up to 6 g random
- Standard: MIL-STD-810, IEC 60068
IPX Rain Test Chamber
Water ingress and rain simulation test chambers for IP protection testing per IEC 60529. Available in drip, spray, jet and immersion configurations for IP1X through IPX8 ratings.
- Tests: IPX1 – IPX8
- Flow rates: per IEC 60529
- Standard: IEC 60529
Salt Spray Test Chamber
Neutral salt spray (NSS), acetic acid salt spray (AASS) and copper accelerated salt spray (CASS) chambers for corrosion resistance testing of coatings, metals and surface treatments.
- NaCl concentration: 5%
- Temp: 35°C / 50°C
- Standard: ISO 9227, ASTM B117
Sand & Dust Test Chamber
Sand and dust ingress protection testing per IEC 60529 (IP5X/IP6X) and MIL-STD-810. Circulating dust/sand with controlled concentration, temperature and velocity to simulate desert and industrial environments.
- Particle size: fine dust / blowing sand
- Tests: IP5X, IP6X, MIL-STD-810
- Standard: IEC 60529, MIL-STD-810G
UV Weathering Test Chamber
UV fluorescent lamp weathering chambers for accelerated outdoor durability testing. Simulates UV radiation, moisture condensation and thermal cycling to evaluate coating, polymer and material degradation.
- Lamp type: UVA-340 / UVB-313
- Temp: ambient to 70°C
- Standard: ASTM G154, ISO 4892-3
Xenon Weathering Test Chamber
Xenon arc lamp weathering chambers for full-spectrum solar simulation and accelerated weathering. Provides the most realistic daylight simulation for outdoor durability testing of materials and coatings.
- Lamp: 1500 W / 6000 W xenon arc
- Irradiance: 0.35–1.10 W/m²/nm
- Standard: ISO 4892-2, ASTM G155
Custom Chamber Configurations Available
All chambers are available in multiple internal volume sizes (from bench-top to walk-in). We can also supply chambers with viewing windows, pass-through ports for cable runs and SCADA integration. Contact us with your volume, test standard and DUT (device under test) requirements.
Get Custom Quote