Specialized footwear and leather testing machines compliant with ISO, EN and GB standards — covering waterproofing, flex resistance, slip resistance, electrical safety and mechanical protection performance.
Our footwear testing equipment range covers all key mechanical, waterproof and safety tests required for shoe certification and quality assurance — from dynamic waterproofing and flex tests to electrical insulation and impact protection testers. All machines are supplied by our partner Haida International and comply with relevant international test standards.
Simulates the flexing and water penetration experienced during walking in wet conditions. Tests the waterproof integrity of shoe uppers and membranes under dynamic flex cycling.
Enquire NowCold flex test machine that evaluates shoe sole and upper flexibility at low temperatures (typically -10°C to -20°C) — ensuring materials remain pliable in cold working environments.
Enquire NowTests the thermal insulation performance of safety footwear in cold environments — measures heat transfer through the shoe bottom to verify compliance with cold insulation ratings.
Enquire NowMeasures the coefficient of friction (CoF) between shoe soles and floor surfaces — tests on standardised surfaces (ceramic, stainless steel) with water and oil lubricants per EN ISO 13287.
Enquire NowStatic water penetration and absorption test machine for leather and textile shoe uppers — measures water uptake and penetration resistance under immersion conditions.
Enquire NowElectrical insulation test machine for safety footwear — applies high voltage to the shoe sole to verify dielectric properties and insulation class compliance.
Enquire NowIndustrial needle and metal fragment detector for finished footwear inspection — detects broken needles and metal contaminants embedded in shoe materials during quality control.
Enquire NowTests the toe cap compression resistance and midsole puncture resistance of safety footwear — verifies conformance to protection class requirements for industrial use.
Enquire NowToe cap impact test machine — drops a standardized striker weight from specified height onto the toe cap to verify the impact energy absorption per EN ISO 20344 safety shoe standards.
Enquire Now| Test Machine | Key Standards |
|---|---|
| Dynamic Waterproof Tester | EN ISO 20344, ASTM F2413, GB/T 20991 |
| Flex Freezing Tester | EN ISO 20344, ISO 5423, EN 344 |
| Cold Insulation Tester | EN ISO 20344, EN ISO 20347, EN 511 |
| Slip Resistance Tester | EN ISO 13287, ASTM F2913, BS 7976 |
| Water Penetration Tester | EN ISO 20344, Satra TM49 |
| Withstand Voltage Tester | EN ISO 20344, IEC 60900 |
| Needle Detector | EN 12127, GB/T 20991 |
| Compression/Puncture Tester | EN ISO 20344, ASTM F2413 |
| Impact Tester | EN ISO 20344, ASTM F2413, GB 12011 |